Description Parameter: None Processing Level: SPD Usage in processing: Section 7.3.3 File Type: Binary FITS Table Units: [V/s] File Names: PP1SLINR, PP2SLINR, PP3SLINR, PC1SLINR, PC2SLINR
The correction tables for signal linearisation are in essence look-up tables providing for a given input signal a corrected output signal. Because the linearisation tables were obtained from a limited range of (calibrated) signals, the upper and lower validity boundaries are listed in the header of the Cal-G file.
Binary FITS table with record length 16. The record fields are:
Field Offset Number Type Description PP1SLFIL 0 1 I*4 Filter (CHW position) PP1SLSIG 4 1 R*4 Uncorrected input signal (plateau average in [V/s]) PP1SLSCR 8 1 R*4 Corrected signal [V/s] PP1SLSCU 12 1 R*4 Uncertainty of the corrected signal [V/s]
The header keywords defining the calibrated signal range
Field Type Description FILTCWd I CHW3 filter position, d=(1,n), n=number of filters LOSIGLd R lower validity limit of signal non-linearity correction [V/s] HISIGLd R upper validity limit of signal non-linearity correction [V/s]
Same as PP1SLINR, see Section 14.8.1, all field keywords start with `PP2'.
Same as PP1SLINR, see Section 14.8.1, all field keywords start with `PP3'.
Binary FITS table with record length 20. The record fields are:
Field Offset Number Type Description PC1SLFIL 0 1 I*4 Filter (CHW position) PC1SLPIX 4 1 I*4 pixel number PC1SLSIG 8 1 R*4 Uncorrected input signal (plateau average in [V/s]) PC1SLSCR 12 1 R*4 Corrected signal [V/s] PC1SLSCU 16 1 R*4 Uncertainty of the corrected signal [V/s]
The header keywords defining the calibrated signal range
Field Type Description FILTCWd I CHW2 filter position, d=(1,n), n=number of filters LOSIGLd R lower validity limit of signal non-linearity correction [V/s] HISIGLd R upper validity limit of signal non-linearity correction [V/s]
Same as PC1SLINR, see Section 14.8.4, all field keywords start with `PC2'.