3.2.4.) The Please Select a Measurement Window

It is shown in Figure 2:.

FIGURE 2: The PIA Please Select a Measurement Window 

It has the following fields:

Data Type:

This field displays the data type chosen.

Detector:

This field displays the detector chosen (or AL for all detectors).

Measurements

This selection box offers the measurements which are available in the buffer, corresponding to Data Type and Detector.

Selection:

This field displays the measurement(s) selected for further processing.

Select All:

This button makes possible to select all pre-selected measurements.

OK

This confirms the selection and closes the window.
Note that the measurement(s) has to be chosen explicitly.

Quit

This exits the window without passing any selection.