8. The Pipeline and its effects

• 8.1 Introduction
• 8.2 ERD to SPD (Derive-SPD)
  • 8.2.1 Read data of one reset interval
  • 8.2.2 Determine Data Range
  • 8.2.3 Subtract MIDBIT Values
  • 8.2.4 Correct for reset pulse effects
  • 8.2.5 Correction of the integration ramp for the RC time constant
  • 8.2.6 Removal of Electrical Cross-talk
  • 8.2.7 Deglitching
  • 8.2.8 Position computation
  • 8.2.9 Extraction of the photo-currents and their uncertainties
  • 8.2.10 Conversion of digitized read-out's to output voltages
  • 8.2.11 Fill flag word
  • 8.2.12 Get Grating angle
  • 8.2.13 Get Fabry-Pérot gap
  • 8.2.14 Assign wavelength for grating and FP
  • 8.2.15 Writing data out
• 8.3 SPD to AAR (Auto-Analysis)
  • 8.3.1 Read all data from SPD
  • 8.3.2 Determine AOT and Velocity correction
  • 8.3.3 Correction for time dependent detector behaviour
  • 8.3.4 Subtraction of dark currents
  • 8.3.5 Responsivity check
  • 8.3.6 Flux calibration
  • 8.3.7 Velocity Correction
  • 8.3.8 Extracting data from the SPD
  • 8.3.9 Sort the internal table in wavelength
  • 8.3.10 Output table files
• 8.4 The Error Propagation of the SWS Pipeline
  • 8.4.1 Introduction
  • 8.4.2 DERIVE SPD
  • 8.4.3 DERIVE AAR
• 8.5 Glitch removal effects in fast speed AOT 1 observations
  • 8.5.1 Introduction
  • 8.5.2 Processing
  • 8.5.3 Results
  • 8.5.4 Conclusions
• 8.6 Version history of the SPG pipeline