| ISOPHOT Instrument Consortium |
| |
| Principal Investigator |
| | D. Lemke |
MPI Astronomie, Heidelberg, Germany |
| |
| Co-Investigators |
| | H. D. Denner |
Freie Universität Berlin, Germany |
| | L. Drury |
DIAS, Dublin, Ireland |
| | F. Garzón |
IAC, La Laguna, Tenerife, Spain |
| | E. Grün |
MPI Kernphysik, Heidelberg, Germany |
| | C. Hajduk |
MPI Astronomie, Heidelberg, Germany |
| | R. D. Joseph |
IRTF-NASA, Hawaii, USA |
| | U. Klaas |
MPI Astronomie, Heidelberg, Germany |
| | W. Krätschmer |
MPI Kernphysik, Heidelberg, Germany |
| | E. Kreysa |
MPI Radioastronomie, Bonn, Germany |
| | W. Martin |
MPI Astronomie, Heidelberg, now Planetarium
Wolfsburg, Germany |
| | K. Mattila |
Helsinki University Observatory, Helsinki, Finland |
| | I. Rasmussen |
DSRI, Lyngby, Denmark |
| | B. Reipurth |
Copenhagen Observatory, Denmark |
| | J. Riedinger |
MPI Astronomie, Heidelberg, Germany, now
ESA/ESTEC |
| | J. Rodríguez Espinosa |
IAC, La Laguna, Tenerife, Spain |
| | M. Rowan-Robinson |
ICSTM, London, United Kingdom |
| | H. Schnopper |
DSRI, Lyngby, Denmark |
| | M. Selby1 |
IAC, La Laguna, Tenerife,
Spain |
| | C. Telesco |
MSFC - NASA, now Univ. Florida, USA |
| | H. Völk |
MPI Kernphysik, Heidelberg, Germany |
| | H. Walker |
RAL, Chilton, United Kingdom |
| | J. Wolf |
MPI Astronomie, Heidelberg, Germany |
| |
| Scientific Associates |
| | J. A. Abolins |
RAL, Chilton, United Kingdom |
| | S. Beckwith |
MPI Astronomie, Heidelberg, Germany |
| | S. Bogun |
MPI Astronomie, Heidelberg, Germany |
| | H. Campins |
University of Florida, USA |
| | R. Chini |
MPI Radioastronomie, Bonn, Germany |
| | J. Gürtler |
Universitätssternwarte, Jena, Germany |
| | I. Heinrichsen |
MPI Astronomie/MPI Kernphysik, Heidelberg,
Germany |
| | T. Henning |
Universitätssternwarte, Jena, Germany |
| | H. Hippelein |
MPI Astronomie, Heidelberg, Germany |
| | H. Krüger |
MPI Astronomie, Heidelberg, Germany |
| | A. Leger |
Univ. Paris VII, Paris, France |
| | C. Leinert |
MPI Astronomie, Heidelberg, Germany |
| | P. Lützow-Wentzky |
MPI Astronomie, Heidelberg, Germany |
| | P. G. Mezger |
MPI Radioastronomie, Bonn, Germany |
| | H. Nørgaard-Nielsen |
DSRI, Lyngby, Denmark |
| | W. Pfau |
Universitätssternwarte, Jena, Germany |
| | T. Ray |
DIAS, Dublin, Ireland |
| | P. Richards |
RAL, Chilton, United Kingdom |
| | S. Russell |
DIAS, Dublin, Ireland |
| | J. Schubert |
MPI Astronomie, Heidelberg, Germany |
| | E. Sedlmayr |
Technische Universität, Berlin, Germany |
| | D. Skaley |
MPI Kernphysik, Heidelberg, Germany |
| | J. Staude |
MPI Astronomie, Heidelberg, Germany |
| | C. Tilgner |
MPI Astronomie, Heidelberg, Germany |
| | R. Tuffs |
MPI Kernphysik, Heidelberg, Germany |
| | M. Wells |
University of Edinburgh, United Kingdom |
| |
| Development |
| |
| Members of PI Team |
| | Peter Ábrahám (MPIA) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Erich Ackermann (MPIA) |
sensitivity calculations and confusion
noise estimates (diploma thesis) |
| | Hans-Heinrich Altfeld (MPIA) |
cryo mechanics development
tests (Ph.D. thesis) |
| | Steven Beckwith (MPIA) |
director, preparation of ISOPHOT
Guaranteed Time programme |
| | Heinrich Bellemann (MPIA) |
head of mechanics workshop,
cryo mechanics development |
| | Jürgen Blum (MPIA) |
high energy radiation impacts on IR
detectors (diploma thesis) |
| | Stefan Bogun (MPIA) |
requirements for ISOPHOT Serendipity
mode operations |
| | Matthias Botz (MPIA) |
characterisation of internal
calibration sources (diploma thesis) |
| | Martin Burgdorf (MPIA) |
detector tests (diploma thesis),
Serendipity mode simulation (Ph.D. thesis) |
| | Armin Böhm (MPIA) |
manufacture of Fine Calibration Sources
for ISOPHOT |
| | Hans Elsässer (MPIA) |
managing director of the institute
(until 1994) |
| | Edgar Fink (MPIA) |
head of administration, industrial contracts |
| | Franz Flock (MPIA) |
manufacture of mechanical components |
| | Ursula Flock (MPIA) |
personnel administration |
| | Peter Franke (MPIA) |
design of ISOPHOT components |
| | Wolfgang Fuhr (MPIA) |
calibration measurements and time line
planning |
| | Carlos Gabriel (MPIA) |
design of pipeline software |
| | Ulrich Grözinger (MPIA) |
electronic engineer, detector
testing, electronic components |
| | Christian Hajduk (MPIA) |
definition of ground segment activities |
| | Heidi Hajduk (MPIA) |
optical components design |
| | K. Haussecker2 (MPIA) |
electronic engineer,
detector testing, electronic components |
| | Ingolf Heinrichsen (MPIA) |
commanding and processing software,
Astronomical Observation Template (AOT) design |
| | Hannelore Heissler (MPIA) |
project administration |
| | Uwe Herbstmeier (MPIA) |
flight operation procedures, instrument
end-to-end testing |
| | Hans Hippelein (MPIA) |
preparation of ISOPHOT Guaranteed Time
programme |
| | Diethelm Johannismann (MPIA) |
FIR filter design (diploma thesis) |
| | Ulrich Kinkel3 (MPIA) |
calibration measurements and time line
planning |
| | Stefan Kirches (MPIA) |
instrument ground testing |
| | Ulrich Klaas (MPIA) |
preparation of ISOPHOT Guaranteed Time
programme, ground segment development coordination,
PIDT build-up |
| | Harald Krüger (MPIA) |
ISOPHOT Guaranteed
Time programme coordination, documentation (Observer's Manual) |
| | Christoph Leinert (MPIA) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Dietrich Lemke (MPIA) |
Principal Investigator ISOPHOT |
| | Dieter Lutz (MPIA) |
detector tests (diploma thesis) |
| | Peter Lützow-Wentzky (MPIA) |
management of industrial
contracts, PIDT build-up |
| | Klaus Meisenheimer (MPIA) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Thomas Müller (MPIA) |
asteroids as celestial FIR standards
(Ph.D. thesis) |
| | Tibor Pacher (MPIA) |
computer system management, AOT logic
testing |
| | Guido Pelz (MPIA) |
preparation of real time operations |
| | Gabriele Roth (MPIA) |
detector curing methods (diploma thesis) |
| | Alison Rushworth (MPIA) |
project secretary, documentation |
| | Ulrich Schneider (MPIA) |
detector curing methods (diploma thesis) |
| | Joseph Schubert (MPIA) |
optical components, instrument ground
testing and detector transients (Ph.D. thesis) |
| | Bernhard Schulz (MPIA) |
instrument ground testing (Ph.D. thesis) |
| | Jakob Staude (MPIA) |
preparation of ISOPHOT Guaranteed Time
programme |
| | Clemens Tilgner (MPIA) |
instrument and system tests |
| | Karsten Wilke (MPIA) |
investigation of signal transients
(diploma thesis) |
| | Lothar Weitzel (MPIA) |
detector array tests (diploma thesis) |
| | Lorenz Wiest (MPIA) |
detector tests (diploma thesis) |
| | Jürgen Wolf (MPIA) |
detector design and testing,
instrument ground testing coordination |
| |
| Members of Co-I teams |
| | Jack Abolins (RAL) |
Real Time software
development coordinator |
| | Rolf Chini (MPIfR) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Linda Cornwall (RAL) |
Quick Look Analysis (QLA) software
development |
| | Luke Drury (DIAS) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Francisco Garzón (IAC) |
project manager ISOPHOT-S,
preparation of ISOPHOT Guaranteed Time programme |
| | Hans-Peter Gemünd (MPIfR) |
FIR filter and polariser
development |
| | Eberhard Grün (MPIK) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Joachim Gürtler (FSJ) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Steve Guest (RAL) |
Offline Processing Pipeline (OLP)
design and development |
| | Graham Hall (RAL) |
Real Time Assessment (RTA) software
development |
| | Peter Hammersley (IAC) |
celestial calibration standards,
preparation of ISOPHOT Guaranteed Time programme |
| | Thomas Henning (FSJ) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Reinhard Hofacker (MPIK) |
electronic components development |
| | Bob Joseph (ICSTM/IRTF) |
ISOPHOT-S design, preparation
of ISOPHOT Guaranteed Time programme |
| | Carsten Kömpe (FSJ) |
design of calibration meausurements
and calibration time line planning |
| | Ernst Kreysa (MPIfR) |
FIR filter and polariser development |
| | Wolfgang Krätschmer (MPIK) |
NIR/MIR filter and polariser
procurement and testing |
| | Kalevi Mattila (Helsinki Observatory) |
preparation of
ISOPHOT Guaranteed Time programme |
| | Peter Mezger (MPIfR) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Hans Ulrik Nørgaard-Nielsen (DSRI) |
preparation of ISOPHOT
Guaranteed Time programme |
| | Werner Pfau (FSJ) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Emil Popow (AIP) |
instrument ground testing |
| | Ib Rasmussen (DSRI) |
Electrical Ground
Segment Equipment development |
| | Tom Ray (DIAS) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Phil Richards (RAL) |
Offline Processing Pipeline (OLP)
design and development |
| | Gotthard Richter (AIP) |
preparation of ISOPHOT Guaranteed
Time programme |
| | José Miguel Rodríguez Espinosa (IAC) |
ISOPHOT-S ground
testing, preparation of ISOPHOT Guaranteed Time programme |
| | Mike Selby4 (ICSTM/IAC) |
ISOPHOT-S design, stellar IR
standards |
| | Detlef Skaley (MPIK) |
PHT Interactive Analysis (PIA)
development |
| | Charles Telesco (Univ. Florida) |
FIR calibration standards,
preparation of ISOPHOT Guaranteed Time programme |
| | Wai Min Tai (DIAS) |
PHT Interactive Analysis (PIA)
development |
| | Richard Tuffs (MPIK) |
Astronomical Observation Template
(AOT) design, preparation of ISOPHOT Guaranteed Time programme |
| | Peter Vaughan (RAL) |
project manager |
| | Heinrich Völk (MPIK) |
preparation of ISOPHOT Guaranteed
Time programme |
| | Helen Walker (RAL) |
Astronomical Observation Template
(AOT) design, preparation of ISOPHOT Guaranteed Time programme |
| | Martyn Wells (ICSTM/ROE) |
ISOPHOT-S design, preparation
of ISOPHOT Guaranteed Time programme, design of
calibration measurements |
| | Robert Wagner (MPIK) |
instrument ground
testing analysis software development |
| |
Members of the German Space Agency
and the Industrial Teams |
| | Günter Albrecht (ZEISS) |
cold focal plane unit; production
manager |
| | Jürgen Altmann (ZEISS) |
cold focal plane unit; test engineer |
| | Manfred Amann (Dornier) |
industrial prime contractor; analogue
electronics |
| | Heiko Bäurle (ZEISS) |
cold focal plane unit; assembly |
| | Hans Peter Batroff (ZEISS) |
cold focal plane unit; coating |
| | Johann Bestler (Dornier) |
industrial prime contractor; electric
system engineering |
| | Wolfgang Bollinger (ZEISS) |
cold focal plane unit; project
manager |
| | Reinhold Bolz (ANTEC) |
infrared detectors; assembly of
P detectors |
| | Walter Breitling (Dornier) |
industrial prime contractor;
system engineer |
| | Kurt Brenner (ZEISS) |
cold focal plane unit; mechanical design |
| | Stefaan Cos (IMEC) |
cold readout electronics; test engineer |
| | Bart Dierickx (IMEC) |
cold readout electronics; design engineer |
| | Peter Dinges (ANTEC) |
infrared detectors; C200 design, assembly |
| | Stefan Dornheim (ZEISS) |
cold focal plane unit; production |
| | Albert Ebert (ZEISS) |
cold focal plane unit; mechanical design |
| | Rudolf Faymonville (ANTEC) |
infrared detectors; project manager |
| | Reiner Felten (ANTEC) |
infrared detectors; electronics, software |
| | Harald Feuer (Dornier) |
industrial prime contractor; instrument
assembly integration test |
| | Vic Fonderie (IMEC) |
cold readout electronics; QA manager |
| | Jürgen Frank (Dornier) |
industrial prime contractor; project
controller |
| | Danny Frederickx (IMEC) |
cold readout electronics |
| | Otto Frenzl (ANTEC) |
infrared detectors; system engineer, QA |
| | Wolfgang Fricke (Dornier) |
industrial prime contractor; project
manager |
| | Hans Göhringer (ZEISS) |
cold focal plane unit; quality
assurance |
| | Peter Hackel (ZEISS) |
cold focal plane unit; quality assurance |
| | Michael Harr (ANTEC) |
infrared detectors; administration |
| | Gernot Hartmann (DLR) |
German Space Agency DLR; programme
manager |
| | Peter Henneberg (ZEISS) |
cold focal plane unit; optics,
straylight |
| | Edgar Herbst (Dornier) |
industrial prime contractor; FPU
shadow engineering |
| | Lou Hermans (IMEC) |
cold readout electronics; project manager |
| | Ottmar Hertel (ANTEC) |
infrared detectors; documentation |
| | Hermann Hohl (ZEISS) |
cold focal plane unit; production |
| | Joachim Junghans (ZEISS) |
cold focal plane unit; electric
design, testing |
| | Hans Köppen (ZEISS) |
cold focal plane unit; chopper assembly,
FPU |
| | Wolfgang Klück (ANTEC) |
infrared detectors; C100 assembly |
| | Axel Koppe (Dornier) |
industrial prime contractor; detector
shadow engineer |
| | Heribert Krüger (ANTEC) |
infrared detectors; spectral
measurements |
| | Hansjörg Lehle (ZEISS) |
cold focal plane unit; electrical
assembly manager |
| | Werner Lenz (Dornier) |
industrial prime contractor; analogue
electronics |
| | Klaus Lethaus (Dornier) |
industrial prime contractor;
electrical interface engineering |
| | Reinhard Link (ZEISS) |
cold focal plane unit; sales manager |
| | Anne Litzelmann (ZEISS) |
cold focal plane unit; test engineer |
| | Reinhard Ludewig (ZEISS) |
cold focal plane unit; design manager |
| | Georg Luichtel (ZEISS) |
cold focal plane unit; quality
assurance, testing |
| | Hans Jürgen Meier (ZEISS) |
cold focal plane unit; FE analysis |
| | Klaus Meyer (ANTEC) |
infrared detectors; S arrays assembly/test |
| | Roland Müller (Dornier) |
industrial prime contractor; software |
| | Manfred Otterbein (DLR) |
German Space Agency DLR; programme
manager |
| | Reinhold Passenheim (ZEISS) |
cold focal plane unit; electric
design, testing |
| | Christian Peschel (ZEISS) |
cold focal plane unit; assembly
of wheels FPU |
| | Klaus Proetel (DLR) |
German Space Agency DLR; funding manager |
| | Michael Röser (ANTEC) |
infrared detectors; C50 assembly |
| | Rudolf Schlegelmilch (ZEISS) |
cold focal plane unit; project
manager |
| | Günter Seger (ANTEC) |
infrared detectors; administration |
| | Axel W. Sohn (ANTEC) |
infrared detectors; C100 detector,
software |
| | Götz Thieme (Dornier) |
industrial prime contractor;
software engineering, operations |
| | Friedrich Trebstein (ZEISS) |
cold focal plane unit; test
engineer |
| | Michael Trunz (ZEISS) |
cold focal plane unit; mechanical design |
| | Jan Vermeiren (IMEC) |
cold readout electronics; technical
project leader |
| | Berthold Vogt (Dornier) |
industrial prime contractor; test
facilities |
| | Erhard Wedel (Dornier) |
industrial prime contractor;
electronics coordination, digital electronics |
| | Hans Willaczek (ZEISS) |
cold focal plane unit;
vibration test |
| |
| Members of Operations
Preparation Teams |
| | Mauro Casale (ESA) |
Uplink and satellite systems support |
| | Carlos Gabriel (ESA) |
PHT Interactive Analysis (PIA)
development |
| | René Laureijs (ESA) |
AOT and pipeline processing design,
design of calibration meausurements |
| | Keith Morgan (ESA) |
Performance Verification Phase
timeline planning |
| | Luciano Orsini (ESA) |
AOT logic development |
| | Johannes Riedinger (ESA) |
Uplink design and development |
| | Bernhard Schulz (ESA) |
Calibration Uplink System (CUS)
development, calibration meausurements and time line planning |
| | Julian Sternberg (ESA) |
Offline Processing Pipeline design
and development |
| | Rob Verschoor (ESA) |
Pipeline processing development |
| |
| Operations |
| |
| Members of PHT Instrument
Dedicated Team (PIDT) |
| | José Acosta Pulido (MPIA/IAC) |
calibration planning and
analysis, PIA development |
| | Michael Braun (MPIA) |
calibration analysis |
| | Héctor Castañeda (MPIA/IAC) |
instrument real time operations,
trend analysis |
| | Linda Cornwall (RAL) |
RTA/QLA development, data quality
control, instrument real time operations |
| | Carlos Gabriel (ESA) |
PIA management, development and
documentation |
| | Ingolf Heinrichsen (MPIK) |
AOT maintenance, OLP scientific
validation, PIA development and documentation |
| | Steffen Huth (MPIA) |
calibration analysis, data quality
control |
| | Ulrich Kinkel5 (MPIA) |
calibration planning
and analysis |
| | Ulrich Klaas (MPIA) |
PIDT leader |
| | René Laureijs (ESA) |
calibration coordination,
observer support |
| | Michael Linden-Vørnle (MPIA) |
calibration analysis |
| | Thomas Müller (MPIA) |
calibration planning and analysis |
| | Guido Pelz (MPIA) |
instrument real time operations,
trend analysis |
| | Mario Radovich (MPIA) |
OLP scientific validation |
| | Pilar Román (ESA) |
data quality control, calibration
analysis |
| | Bernhard Schulz (ESA) |
PIDT deputy leader, calibration
planning and analysis |
| |
| Members of PI team |
| | Peter Ábrahám (MPIA) |
optimisation of faint source
observing strategies, calibration analysis |
| | Stefan Bogun (MPIA) |
Serendipity Survey analysis
software development and calibration |
| | Ulrich Grözinger (MPIA) |
instrument commissioning |
| | Martin Haas (MPIA) |
Guaranteed Time programme execution,
calibration analysis |
| | Hannelore Heissler (MPIA) |
project administration |
| | Philippe Héraudeau (MPIA) |
ELAIS survey analysis, calibration
analysis |
| | Edgar Herbst (Dornier) |
instrument commissioning |
| | Uwe Herbstmeier (MPIA) |
data centre build-up, calibration |
| | Hans Hippelein (MPIA) |
scientific data analysis |
| | Thilo Kranz (MPIA) |
straylight measurement analysis
(diploma thesis) |
| | Harald Krüger (MPIA) |
Guaranteed Time programme execution,
calibration analysis |
| | Michael Kunkel (MPIA) |
computer system manager |
| | Christoph Leinert (MPIA) |
scientific data analysis |
| | Dietrich Lemke (MPIA) |
Principal Investigator ISOPHOT |
| | Klaus Meisenheimer (MPIA) |
scientific data analysis |
| | Thomas Müller (MPIA) |
asteroids as celestial FIR standard
sources (Ph.D. thesis) |
| | Stephan Nicklas (MPIK) |
calibration analysis |
| | Alison Rushworth (MPIA) |
project secretary, documentation |
| | Manfred Stickel (MPIA) |
Serendipity Survey analysis, software
development and calibration |
| | Christian Surace (MPIA) |
ELAIS survey analysis, calibration
analysis |
| | Clemens Tilgner (MPIA) |
instrument commissioning |
| | Victor Tóth (MPIA) |
Serendipity survey data analysis |
| |
| Post Operations |
| |
| Members of National Data Centres |
| | Peter Ábrahám (MPIA) |
calibration and scientific data
analysis, user support |
| | José Acosta-Pulido (IAC) |
calibration analysis |
| | Immo Appenzeller (MPIA) |
acting director, management support |
| | Steven Beckwith (MPIA) |
director, Guaranteed Time science
projects, support of ISOPHOT Data Centre |
| | Simone Bianchi (MPIA) |
calibration analysis |
| | Carlos Del Burgo Díaz (MPIA) |
calibration analysis |
| | Martin Haas (MPIA) |
calibration and scientific data
analysis, user support |
| | Philippe Héraudeau (MPIA) |
ELAIS survey and calibration
analysis |
| | Stephan Hotzel (MPIA) |
Serendipity Survey data analysis |
| | Ulrich Klaas (MPIA) |
ISOPHOT Data Centre manager,
calibration coordinator and offline s/w activities |
| | Dietrich Lemke (MPIA) |
ISOPHOT Principal Investigator and
Head of ISOPHOT Data Centre |
| | Huw Morris (RAL) |
OLP development |
| | Mario Radovich (MPIA) |
OLP scientific validation,
scientific and calibration analysis |
| | Phil Richards (RAL) |
OLP design development and
scientific validation |
| | Hans-Walter Rix (MPIA) |
director, management support |
| | Linda Schmidtobreick (MPIA) |
calibration and scientific data
analysis |
| | Manfred Stickel (MPIA) |
Serendipity Survey data analysis,
scientific data analysis, user support |
| | Victor Tóth (MPIA) |
Serendipity Survey data analysis |
| | Richard Tuffs (MPIK) |
PIA development |
| | Helen Walker (RAL) |
UKIDC user support coordination |
| | Karsten Wilke (MPIA) |
OLP scientific validation,
scientific and calibration analysis |
| |
| Members of ISO Data Centre |
| | Carlos Gabriel (ESA) |
PIA management, development and
documentation |
| | René Laureijs (ESA) |
PHT team leader, community support,
calibration analysis, handbook documentation |
| | Thomas Müller (ESA) |
calibration analysis,
handbook documentation |
| | Sybille Peschke (ESA) |
community support,
calibration analysis |
| | Pilar Román (ESA) |
calibration analysis |
| | Bernhard Schulz (ESA) |
community support,
calibration analysis, handbook documentation |